Wayne HSG400 Spécifications télécharger pdf (Page 9)

PAGE 8

D. The flue gas temperature should be between

325˚F (162.78˚C) and 550˚F (287.78˚C)for

domestic gas conversion burners. Higher flue

gas temperatures indicate overfiring or

excessive draft through the appliance. Lower

flue gas temperatures may cause excessive

condensation and indicate underfiring. Consult

your local utility or the appliance manufacturer

for acceptable flue gas temperatures.

CAUTION: IF THE BURNER BTU/HR (kW/Hr)

INPUT IS CHANGED, REPEAT STEP 13

14. FILL OUT THE INSTALLATION COMBUSTION

DATA TAG AND AFFIX IT TO THE BURNER OR

CONVERTED APPLIANCE.

SUGGESTION: All new installations should be

reinspected for proper combustion and burner

operation after one or two weeks of normal

operation.

For subsequent normal starting and shut off

procedure, refer to the “Consumer Instructions” in

the back of this manual or the instruction plate

attached to the burner.

IMPORTANT

THESE SETTINGS ARE FOR INITIAL STARTUP ONLY, AND MUST BE

READJUSTED FOR COMBUSTION EFFICIENCY.

3/8” (9.525mm)

Figure 12A Figure 12B

Figure 12C

HSG200 SET AT NO. 1

HSG400 SET AT NO. 1 1/2

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 22 23

Pas de commentaire

Wayne HSG400 Spécifications Page 9