Wayne PC1 Manuel d'utilisation et d'entretien télécharger pdf

Self-Priming

Transfer Pumps

Table of Contents

Description ......................1

Unpacking .......................1

Safety Guidelines .................1

General Safety Information .........1

Installation.......................2

Operation .......................2

Maintenance .....................3

Troubleshooting Chart . . . . . . . . . . . . .4

Replacement Part Information ....6-7

Warranty ........................8

Description

These self-priming transfer pumps are

designed to easily transfer water from

one point to another. Model PC1, 12

Volt Transfer Pump is convenient when

normal power is not readily available.

Typical applications include removing

water from pool covers, clogged

drains, stock tanks, water basins, boats,

cisterns, etc. Model PC2, 115 Volt

Transfer Pump is great for household

usage. Typical applications include

removing water from waterbeds,

clogged sinks, basements, etc. Note: Do

NOT use PC2 in pool areas. The motors

on both models PC1 and PC2 are non-

submersible.

General Safety Information

CALIFORNIA PROPOSITION 65

This product or

its power cord may

contain chemicals known to the State

of California to cause cancer and birth

defects or other reproductive harm.

Wash hands after handling.

GENERAL SAFETY

Do not submerge

motor or allow

motor to be exposed to water. Personal

injury and/or death could result. Keep

pump and power cords away from

liquids. Model PC1 becomes very hot

during operation.

Do not pump gasoline or

other explosive liquids. Do

not operate pump where

ﬂammable or explosive fumes or gases

are present as a ﬁre or explosion could

result. Pump should only be used to

pump clear water. Do not run pump

dry.

1. Read all instructions

before operation.

2. Protect electrical cord

from sharp objects, hot

surfaces, oil and chemicals. Avoid

kinking the cord and replace

damaged cords immediately.

This pump has been

evaluated for use

with water only.

Unpacking

Inspect this unit before it is used.

Occasionally, products are damaged

during shipment. If the pump or

components are damaged, return

the unit to the place of purchase for

replacement. Failure to do so could

result in serious injury or death.

READ & FOLLOW ALL INSTRUCTIONS

SAVE THESE INSTRUCTIONS

DO NOT DISCARD

Safety Guidelines

This manual contains information

that is very important to know and

understand. This information is

provided for SAFETY and to PREVENT

EQUIPMENT PROBLEMS. To help

recognize this information, observe the

following symbols.

Danger indicates an

imminently

hazardous situation which, if not

avoided, WILL result in death or serious

injury.

Warning indicates a

potentially

hazardous situation which, if not

avoided, COULD result in death or

serious injury.

Caution indicates a

potentially

hazardous situation which, if not

avoided, MAY result in minor or

moderate injury.

Notice indicates

important

information, that if not followed, may

cause damage to equipment.

NOTE: Information that requires special

attention.

Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described.

Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or

property damage! Retain instructions for future reference.

For parts, product & service information

visit www.waynepumps.com

REMINDER: Keep your dated proof of purchase for warranty purposes!

Attach it to this manual or file it for safekeeping.

321207-001 08/12

Operating Instructions & Parts Manual PC1 and PC2 Series

MANUAL

1 2 3 4 5 6 7 8

Résumé du contenu

Page 1 - Transfer Pumps

Self-Priming Transfer PumpsTable of ContentsDescription ...1Unpacking ...1Safety Guidelines ...1G

Page 2 - Installation

Models PC1 and PC2 include a six foot long suction hose, a water suction attachment, and a replacement parts kit which includes: impeller, gasket, sha

Page 3 - 12 VOLT WIRING DIAGRAM

3PC1 and PC2 Serieswww.waynepumps.comOperation (Continued) 4. Connect pump to power source, with pump in a dry location. Model PC1: Motor must be con

Page 4 - Troubleshooting Chart

4Operating Instructions and Parts ManualTroubleshooting Chartwww.waynepumps.comSymptom Possible Cause(s) Corrective ActionPump will not start or run 1

Page 5 - PC1 and PC2 Series

5PC1 and PC2 SeriesNoteswww.waynepumps.com

Page 6 - Call 1-800-237-0987

6For Replacement Parts or Technical Assistance, Call 1-800-237-0987Please provide following information: Address any correspondence to:- Model numbe

Page 7 - PC1 KITS PC2 KITS

7Replacement Parts List for Self-Priming Transfer PumpsPC1 and PC2 Serieswww.waynepumps.comPC1 KITS PC2 KITSDescription Part No.Impeller & SealBru

Page 8 - Limited Warranty

8Operating Instructions and Parts Manualwww.waynepumps.comLimited WarrantyFor one year from the date of purchase, Wayne Water Systems (“Wayne”) will r

Commentaires sur ces manuels

Pas de commentaire

Wayne PC1 Manuel d'utilisation et d'entretien

Naviguer en ligne ou télécharger Manuel d'utilisation et d'entretien pour Pompes à eau Wayne PC1. Wayne PC1 Use and Care Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Pompes à eau Wayne PC1